Connecting To A New Wi-Fi Router; Disabling Wi-Fi Features - Epson EcoTank ET-M1170 User Manual

Uninstalling Product Software - Mac

Connecting to a New Wi-Fi Router

If you change the wireless router you have been using on your network, you need to update your
product's Wi-Fi connection to the new router.
Note: If you switch to a 5 GHz wireless router, set the router to operate in dual band (2.4 GHz and
5 GHz) mode. If your router uses a single network name (SSID) for both the 2.4 GHz and 5 GHz band,
give each band its own network name (SSID) instead, such as Home Network 2.4 GHz and Home
Network 5 GHz. See your router documentation for instructions.
1. Do one of the following:
• Windows: Uninstall your product software.
• Mac: Go to the next step.
2. Download and install your product software from the Epson website using the instructions on the
Start Here sheet.
Parent topic:
Related tasks
Uninstalling Printing Software - Windows

Disabling Wi-Fi Features

You may need to disable your product's Wi-Fi features if you change your network connection type or
need to solve a problem with your network connection. You can disable the Wi-Fi features by resetting
the network settings to their default values.
Note: Before disabling Wi-Fi features, make a note of your product's SSID (network name) and
password, and any network settings selected for the Epson Connect services you may use. These
settings will be reset to their default values.
1. Turn off the product.
2. Hold down the
Wi-Fi Direct light flash alternately. Then release both buttons.
When the
Parent topic:
Changing or Updating Network Connections
network status button and press the
Wi-Fi light and Wi-Fi Direct light turn off, Wi-Fi is disabled.
Changing or Updating Network Connections
power button until the
34
Wi-Fi light and