Power Delivery And Smart Power - Philips EVNIA 42M2N8900/00 User Manual

4. Power Delivery and
Smart Power
You can power your compatible device
with up to 90 Watts of power from this
monitor.
1
What is it?
Smart Power is an exclusive Philips
technology that provides flexible power
delivery options for various devices.
This is useful for recharging high
performance laptops with only one
cable.
With Smart Power, the monitor makes it
possible to deliver up to 90W of power
through the USBC port, compared to the
standard 65W.
To prevent damaging the device, Smart
Power enables protections to limit
current draw.
2
How to enable Smart Power?
SmartImage Game Mode Ambiglow
HDMI Refresh Rate Smart Power On
OSD Setting Smart Power Off
PIP/ PBP
Smart Size
USB Setting
Smart Power
Over Scan
Resolution Refresh Rate
3840X2160 60Hz
1. Toggle to the right to enter OSD
Menu Screen.
2. Toggle to the up or down to select
main menu [Setup], then toggle to
the right to confirm.
3. Toggle to the up or down to turn on
or off the [Smart Power].
Input Audio System Setup
Input Source Adaptive Sync SmartImage
USB C Off Standard
3 Power through USBC port:
1. Connect the device to the USBC port.
2. Turn on [Smart Power].
3. If [Smart Power] is on, and USBC
is used for power, then maximum
power delivery depends on the
brightness value of the monitor.
You may adjust the brightness value
manually to increase power delivery
from this monitor.
There are 2 power delivery levels:
Level 1
Level 2
Note
• If [Smart Power] is on, and DFP
(Downstream Facing Port) is using
more than 5W, then USBC can only
deliver up to 65W.
• If [Smart Power] is off, then USBC
can only deliver up to 65W.
• PowerSensor and LightSensor
Close
cannot be enabled with Smart Power
simultaneously.
Select
OK
Back
18
Brightness Power Delivery
value from USBC
0~70 90W
71~100 65W