Table of Contents
Advertisement
h.
WLAN card
i.
palmrest
j.
display assembly
k.
display bezel
3. To remove screws from the display panel :
a. Remove the 4 (M2.0X3.0) screws that secure the display panel to the display assembly [1].
b. Lift the display panel and turn the display panel over to access the eDP cable [2].
4. To remove display panel:
a. Peel the adhesive tape to access the eDP cable [1].
b. Peel the adhesive tapes that secures the eDP cable [2].
c. Lift the metal tab and disconnect the eDP cable from the connector on the display panel [3, 4].
94
Removing and installing components
Advertisement
Table of Contents
