Solid State Drive - Optional; Removing The M.2 Solid State Drive-Ssd Module - Dell P34E Service Manual

2. Install the:
a. base cover
b. battery
c. battery cover
d. SD card
3. Follow the procedure in
Solid State Drive — optional
Removing the M.2 Solid State Drive—SSD module
1. Follow the procedures in
2. Remove the:
a. SD card
b. battery cover
c. battery
d. base cover
NOTE: Removal of base cover is required only to access the M.2 SSD module in slot 3, 5 or 6.
3. To remove the M.2 SSD module (Slot 4):
a. Remove the single (M2.0x3.0) screw that secures the SSD assembly to the system [1].
b. Pull the release latch to unlock the SSD assembly [2].
c. Remove the SSD assembly from the system [3].
After working inside your
Before working inside your
computer.
computer.
Removing and installing components 43