Chapter 9 Safety Instructions - ASROCK PG32QF2B User Manual

Chapter 9 Safety Instructions

•
Read the safety instructions carefully and thoroughly.
• All cautions and warnings on the device or User Guide should be noted.
• Refer servicing to qualified personnel only.
Power
• Make sure that the power voltage is within its safety range and has been adjusted
properly to the value of 100~240V before connecting the device to the power outlet.
• If the power cord comes with a 3-pin plug, do not disable the protective earth pin
from the plug. The device must be connected to an earthed mains socket-outlet.
• Please confirm the power distribution system in the installation site shall provide
the circuit breaker rated 120/240V, 20A (maximum).
• Always disconnect the power cord or switch the wall socket off if the device would
be left unused for a certain time to achieve zero energy consumption.
• Place the power cord in a way that people are unlikely to step on it. Do not place
anything on the power cord.
• If this device comes with an adapter, use only the ASRock provided AC adapter
approved for use with this device.
European Union:
Batteries, battery packs, and accumulators should not be disposed of as unsorted
household waste. Please use the public collection system to return, recycle, or treat
them in compliance with the local regulations.
California, USA:
The button cell battery may contain perchlorate material and requires special
handling when recycled or disposed of in California. For further information please
visit: https://dtsc.ca.gov/perchlorate/
30