Seagate EXOS ENTERPRISE 2X18 SAS 512E Standard Product Manual page 44

www.seagate.com
Table 5 Supported commands
Command name
[4]
Write Same (10)
PBdata
LBdata
[4]
Write Same (16)
Write Same (32)
XDRead
XDWrite
XPWrite
[1] Warning. Power loss during flash programming can result in firmware corruption. This usually makes the drive inoperable.
[2] Reference Mode Sense command 1Ah for mode pages supported.
[3] Y = Yes. Command is supported.
N = No. Command is not supported.
A = Support is available on special request.
[4] Approximately 1.5 increase in time to complete this command for a SED drive versus a non-SED drive of the same capacity.
[5] The MLU field can be used to determine whether an individual command operates at a device-level or LUN-level, as described in
SCSI Primary Commands - 5 (SPC-5), r22 or later.
Seagate Exos 2X18 SAS Product Manual, Rev. A
[5]
Command code MLU
41h 00
93h 00
7Fh/000Dh 00
52h
50h
51h
Interface requirements
[3]
Supported
Y
N
N
Y
Y
N
N
N
43