www.seagate.com
6.6.4
Shock and Vibration
Shock and vibration measurements specified in this document are made directly on the drive itself and applied in the X, Y, and Z axis at the drive
mounting point locations.
6.6.4.1
Shock
a. Operating
The drive will operate without error while subjected to intermittent shock pulses not exceeding 40g typical at a 2ms duration
limited by Z-axis, shown in
b. Non-operating
The drive will operate without non-recoverable errors after being subjected to shock pulses not exceeding 200g at a duration of
2ms.
Figure 3.
Drive orientation
6.6.4.2
Vibration
a. Linear Random Operating Vibration
The drive will operate without non-recoverable errors while being subjected to the random power spectral density noise
specified below.
b. Random Rotary Operating Vibration
The drive will exhibit greater than 90% throughput for sequential and random write operations while subjected to the shaped
random power spectral density noise specified below.
c. Linear Random Non-Operating Vibration
The drive will not incur physical damage or have non-recoverable errors after being subjected to the power spectral density
noise specified below.
Seagate Exos 2X18 SAS Product Manual, Rev. A
Figure
3.
Physical/electrical specifications
28