Table of Contents
Advertisement
1886
Put the blade washers, found in the
blade screws, found in the
hardware bag. Then install the blade
screws to secure each blade to a blade iron.
Repeat x5
IMPORTANT
NOTE: The blade arms should be mounted with
the ridge facing downward. Installing it incorrectly
could result in your fan not functioning.
7
Ceiling Bracket
Installing the Canopy
Lift the canopy into place so that
the screw holes are aligned.
Installing the Blades:
hardware bag, onto the
Hanging Fan
Wiring
Insert the two canopy screws
found in the
IMPORTANT
NOTE: Follow the instructions on the blade. Installing
it incorrectly could result in your fan not functioning.
Remove instructional label after installation.
Ridge
Note:
Fan style may vary.
Canopy
hardware bag.
Canopy Screw
bag
bag
bag
Note:
Fan style may vary.
Blade Arm Screw
bag
Lightly attach the blade arms to the motor with
screws found in the
hardware bag, then
securely tighten after both screws are attached.
Repeat x5
Blades
Light
x2
x15
Blade Screw
x15
Washer
x10
Pull Chains
Advertisement
Table of Contents
