QTek S200 User Manual page 89

Note Wi-Fi networks are self-discoverable, meaning that no additional steps are required for your
device to connect to a Wi-Fi network. It may be necessary to provide a username and password
for certain closed wireless networks, however.
To save battery power while connected to a Wi-Fi network
1. Tap Start > Settings > Connections tab > Wireless LAN to open the Wireless LAN
Settings screen.
2. On the Power Mode tab of the Wireless LAN Settings screen, move the Power Save
Mode slider to a position that optimizes performance with the least power consumption.
For example, move the slider to the left (Best Performance) to have the optimal WLAN
performance; move to the right (Best Battery) to obtain the maximum battery usage.
To check the Wireless LAN status
You can check the current wireless connection status from the following three screens of
your device:
• Title bar. When you enable Wi-Fi on your device, the Wi-Fi ON icon (
on the title bar.
After Wi-Fi is turned on, your device scans for available wireless networks and the
wireless signal icon (
back and forth while your device is scanning for a wireless LAN signal. Once your
device successfully connects to a wireless LAN, the arrows stop moving.
• Wireless LAN screen - Main tab. Here, it shows the name of the wireless network
that your device is currently connected to. The configuration and signal quality of the
wireless network are also shown.
) appears on the title bar. The arrows in this icon will move
Getting Connected 89
) will appear