Hunter Cedar Key Installation Manual page 9

Remove the cardboard plug
guard before proceeding!
Connect the plugs from
the fan and light fixture.
Make sure to line up
the colored markings
on the connectors.
Need a little more help with assembling this light?
Visit our light kit video at:
Hunter Pro Tip:
Want to install your fan without a light kit?
Go to www.HunterFan.com/FAQs
fan without the light kit?"
Ceiling Bracket Hanging Fan
Assembling the Light
Push the connector and
excess wire into the hole at
the top of the light fixture.
IMPORTANT
The connector and excess wiring
must be pushed into the light
fixture in order to successfully
mount the light fixture to the fan.
HOLD HERE
http://bit.ly/HunterQuickConnect
Installing the Bulb and Glass
Install the included LED
bulb into the socket. When
necessary, replace with
bulb of same wattage.
and click "How do I install my
Wiring Canopy
Raise the light kit to the bottom of the fan.
Align the notch on the mounting ring on the
top of the light kit with the pin in the mounting
bracket on the bottom of the fan.
Give the fixture a gentle,
clockwise turn to ensure the
fixture is secure and that the
locking pin has engaged.
Lift the glass and attach it to
the light fixture using the three
thumbscrews. Tighten all three
screws securely by hand.
Blades Light
Notch
Some components not shown for visual clarity.
Remote Remote Cradle Troubleshooting
1886
Pin
ON
8