Table of Contents
Advertisement
1886
Insert grommets found in the
holes in the blades, then secure each blade to a blade arm
with screws found in the
hardware bag.
Repeat x4
x8
Blade Arm Screw
bag
Repeat x4
7
Ceiling Bracket
Downrod
Installing the Canopy
Lift the canopy into place so that
the screw holes are aligned.
Installing the Blades:
hardware bag into the
Lightly attach the blade arms to the motor with
screws found in the
hardware bag, then
securely tighten after both screws are attached.
Hanging Fan
Insert the two canopy screws
found in the
Hunter Pro Tip:
Let the tool do the work!
A magnetic screwdriver will
give you more visibility when
securing the canopy.
Note:
Fan style may vary.
Wiring
Canopy
hardware bag.
bag
bag
bag
IMPORTANT
NOTE: Follow the instructions on the blade. Installing it
incorrectly could result in your fan not functioning.
Note:
Fan style may vary.
Blades
Light
x2
Canopy Screw
Canopy Screw
x12
Blade Screw
x12
Grommet
Glass/Bulbs
Advertisement
Table of Contents
