Hunter Candle Bay Installation Manual page 8

1886
IMPORTANT
NOTE: The blade arms should be mounted with
the ridge facing downward. Installing it incorrectly
could result in your fan not functioning.
Put the blade washers, found in the
blade screws, found in the
blade screws to secure each blade to a blade iron.
Repeat x5
IMPORTANT
NOTE: Follow the instructions on the blade. Installing it
incorrectly could result in your fan not functioning.
7
Ceiling Bracket
Installing the Canopy
Lift the canopy into place so that
the screw holes are aligned.
Installing the Blades
hardware bag, onto the
hardware bag. Then install the
Hanging Fan Wiring
Insert the two canopy screws
found in the
Lightly attach the blade arms to the motor with screws
found in the hardware bag, then securely tighten
after both screws are attached.
Repeat x5
Ridge
Note:
Fan style may vary.
Canopy Blades
hardware bag.
Canopy Screw
bag
bag
Note:
Fan style may vary.
x15
Blade Screw
bag
Washer
bag
Light Glass/Bulbs
x2
x10
Blade Arm
Screw
x15
Remote