Replacing Components; Glass - England's Stove Works 15-W01 Installation & Operation Manual

Glass

This unit has a ceramic glass panel (Part No. AC‐G50) in the viewing door; self adhesive
window gasket is included with replacement windows purchased directly from Englander. Never
replace ceramic glass with tempered or any other type of glass and never operate this unit with
cracked or broken glass.
• Glass Size: 12.75 in. (323.85 mm) x 16.75 in. (425.45 mm)
• Glass Type: 5mm Ceramic Glass (Keralite Pyroceram)
• Glass Manufacturer: Eurokera
Glass Precautions
1. Never replace ceramic glass with tempered or any other type of glass.
2. Never operate this unit with cracked or broken glass.
3. Do not slam the door or strike the glass with any objects.
4. Do not build the fire directly against the glass.
Glass Cleaning
1. Be certain the stove and the glass are completely cool.
2. The build‐up on the glass will generally be light and water is normally sufficient to
remove the deposits. If stubborn soot persists, use a cleaner made specifically for this
purpose. Do not scrape the glass or use abrasive cleaners.
3. Rinse the glass with clean water and dry the glass before resuming normal operation.
Glass Replacement
1. Remove the door from the stove and rest it face down on a firm work surface.
2. Using a 5/16" wrench, remove the four window bracket retaining screws.
3. Remove the four window tabs from the door. Take extra care to avoid shards of glass if
the glass window has been broken.
4. Lift the old glass panel out of the door and discard.
5. The glass panel must be wrapped with a self‐adhesive fiberglass tape gasket (AC‐GGK).
If you purchased a new glass, it will come already wrapped. If reusing the same piece of
glass, remove old gasket, scrape off old adhesive and wrapped with the AC‐GGK. This
gasket serves to cushion the glass from the cast iron door.
6. Reinstall the window retaining tabs using the four screws previously removed. Do not
over‐tighten the screws.

REPLACING COMPONENTS