Table of Contents
Advertisement
•
M.2 2280 Intel Optane
The following image(s) indicate the location of the solid-state drive/Intel Optane and provides a visual representation of the removal
procedure.
Steps
1. Lay the computer with its right side facing down.
2. Remove the screw (M2x3) that secures the solid-state drive/Intel Optane to the system board.
3. Slide and lift the solid-state drive/Intel Optane from the M.2 card slot on the system board.
Installing the SSDIntelOptane
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
NOTE:
You may install the following supported modules on your computer's M.2 card slot:
Removing and installing components
17
Advertisement
Table of Contents
