Table of Contents
Advertisement
Installing the media-card reader
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the media-card reader and provides a visual representation of the installation procedure.
Steps
1. Connect the media-card reader into its slot on the chassis.
2. Replace the screw (6-32) that secures the media-card reader to the chassis.
Next steps
1. Install the
front
cover.
2. Install the
left-side
cover.
3. Follow the procedure in
36
Removing and installing components
After working inside your
computer.
Advertisement
Table of Contents
