Removing The Swivel Neck Cover; Changing The Electronic Controller; Replacing The Foot Pedal - Windsor Versamatic Plus 14 Operating Instructions Manual

38
41
X
41
0
40
86404580 VERSAMATICPLUS 14 & 18

Removing The Swivel Neck Cover

40
To remove the swivel neck cover, take out the
retaining screw and slide the cover (40) downwards
then lift out. On re-assembly check that the wires do
not become trapped.

Changing The Electronic Controller

To change the electronic controller (41), disconnect
the lead from the motor. Lift the controller upwards
and then disconnect the lead from the swivel neck.

Replacing the Foot Pedal

Remove the power head from the upper housing.
Remove the cover from the power head. Remove the
retaining screw. Insert a screw driver in the notch on
the axle and slide the axle out. Remove and replace
foot pedal. Re-assemble.
NOTE: Ensure that at re-assembly, the axle (0)
notch (40) is visible as shown
Maintenance
15