Preparation
Vacuum motor housing
Dustbag housing
Suction hose
On off switch
Cables cleats
Carrying recess
Back cover
Power head
Assembling the vacuum cleaner
Hold the vacuum section in the vertical
position and insert into the power head.
Locate the line (13) on the motor housing
accurately opposite the rib on the swivel
neck (14). The locking catch (15) must be
turned to the left during the locating. Secure
the vacuum section in place the turning the
locking catch to the vertical position.
Attaching suction hose
Push the black end of the hose into the
connecting tube (12) so that it clicks into
place. To disconnect the hose press the
retaining ring (11) and pull the hose out of
tube.
Swivel neck latch
To release the machine from the upright
position depress the foot pedal (16).
Power head on
Power head motor stops automatically when
hand nozzle (17) is withdrawn and restarts
automatically when reinserted. If power head
does not start check that hand nozzle is fully
inserted.