Monitor Cropping Images - Panasonic i-PRO WV-SPN531 Operating Instructions Manual

A zoom operation can be performed using the mouse wheel.
When clicking a desired point while displaying live images at x2 or x4 in the main area, the camera will
move to locate the clicked point at the center of the main area.
Note
•
When the camera is operated by a user with a low access level, images displayed on the screen
may be changed temporarily. This does not affect operation of the camera.
•
Depending on the PC in use, screen tearing* may occur when the shooting scene drastically
changes due to the GDI restrictions of the OS.
*A phenomenon in which portions of the screen are displayed out of alignment.
*1 Only operable by users whose access level is "1. Administrator".
*2 Used by super resolution techniques.
*3 Only operable by users whose access level is "1. Administrator" or "2. Camera control" when "On" is selected for "User
auth." (®page 143)
*4 Operable by users who belong to the access level selected for "Permission level of audio trans./recep." on the [Audio] tab of the
"Image/Audio" page. Refer to page 115 for the permission level of audio.

1.3 Monitor cropping images

Full angle images and cropping images can be transmitted at the same time.
The cropping function must be configured in order to transmit cropping images. (®page 140)
Either one of H.264(1), H.264(2), H.264(3), H.264(4), JPEG(1), JPEG(2), or JPEG(3) images or all of H.
264(1), H.264(2), H.264(3), and H.264(4) images can be set as cropping images.
By matching the settings of the [Compression] and [Stream]/[Image capture size] buttons on the "Live" page
to the stream selected in "Cropping" on the [Cropping] tab, cropping images will be displayed on the
[Cropping] display of the "Live" page and the main area.
Cropping
A
You can crop areas that you want to monitor.
By setting multiple cropping areas, up to 4 areas can be displayed in a sequence.
1 Monitor images on a PC
Operating Instructions 13