Operating Instructions; Power On / Off; Auto Power Off; Auto Hold - Amprobe IR-450-EUR User Manual

OPERATING INSTRUCTIONS

Power On / Off

Auto Power Off

The IR-450 / IR-450-EUR will power down after not being
used for 3 minutes.

Auto Hold

The unit will hold the reading for 10 seconds after the
on button is pressed.

Operating the Unit

To measure temperature, point unit at an object and press
the Test button. Be sure to consider distance-to-spot size
ratio and your distance from the measured object. The
IR-450 / IR-450-EUR is equipped with a laser. Use the laser
only for aiming. See "Taking Temperature Measurement".

Taking Temperature Measurement

Target Area
Incorrect
3