Table of Contents
Advertisement
Menus and submenus
222
Using : or 9, select the
X
Running Lights
If the
Daytime Running Lights
been switched on, the multifunction display
shows the cone of light and the W symbol
in yellow.
Press the a button to save the setting.
X
Further information on daytime running
lampsDaytime Running Lights
Instrument cluster submenu
Selecting the distance unit
The
Display Unit Speed-/Odometer
allows you to choose whether certain displays
appear in kilometers or miles in the multifunc-
tion display.
Press the ò button on the steering wheel
X
to open the menu list.
Press the : or 9 button on the steering
X
wheel to select the
Confirm by pressing a on the steering
X
wheel.
Use : or 9 to select the
X
Cluster
submenu.
Press a to confirm.
X
Press : or 9 to select the
X
Unit Speed-/Odometer
The current setting
Press the a button to save the setting.
X
The selected unit of measurement for distance
applies to:
Digital speedometer in the
R
Odometer and the trip odometer
R
Trip computer
R
Current consumption and the range
R
Range
R
Navigation instructions in the
R
Cruise control
R
DISTRONIC PLUS with Steering Assist and
R
Stop&Go Pilot
ASSYST PLUS service interval display
R
Switching the additional speedometer
on/off
If the additional speedometer is switched on,
the speed is shown in the status bar in the mul-
tifunction display instead of the outside tem-
perature.
Daytime
function.
function has
(
page 113).
Y
function
Settings
menu.
Instrument
Display
function.
km
or
Miles
appears.
Trip
menu
Navi
menu
The speed display is inverse to the speedome-
ter.
Press the ò button on the steering wheel
X
to open the menu list.
Press the : or 9 button on the steering
X
wheel to select the
Confirm by pressing a on the steering
X
wheel.
Use : or 9 to select the
X
Cluster
submenu.
Press a to confirm.
X
Using : or 9, select the
X
Speedometer [km/h]
The current selection appears.
To activate/deactivate: press the a but-
X
ton again.
Restoring the factory settings
Press the ò button on the steering wheel
X
to open the menu list.
Press the : or 9 button on the steering
X
wheel to select the
Confirm by pressing a on the steering
X
wheel.
Use : or 9 to select the
X
Settings
submenu.
Press a to confirm.
X
The
Reset All Settings?
appears.
Press : or 9 to select
X
Press a to confirm the selection.
X
If you have selected Yes, the multifunction
display shows a confirmation message.
For safety reasons, the
Lights
function in the
reset when the vehicle is stationary.
Settings
menu.
Instrument
Additional
function.
Settings
menu.
Factory
function
No
or Yes.
Daytime Running
Lights
submenu is only
Advertisement
Table of Contents
