LG WGT9532VH Service Manual page 27

When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set manually.
1
Press the POWER button to turn power on.
2
Wash Only
Press the Wash button to
select the desired wash
time.
Wash and Rinse only
Press the Wash button to
select the desired wash
time.
Press the Rinse button to
select the desired number
of Rinses.
You can use this option
for preventing wrinkles by
not allowing the tub to
spin after the Rinse.
3
Press the Water Level button to select the water level
according to the amount of laundry. If you do not select a
level, it will remain on the middle level default setting.
The correct water level is when the clothes are completely
submerged in water..
4
Add the clothes into the washing tub.
5
Press the START/PAUSE button.
6
Add the detergent and close the lid.
NOTE
• When a Wash, Wash/Rinse or Rinse only option is selected, after the wash is completed the water will not
be drained out. If you wish to drain the water, but not engage the spin, then follow the above Drain Only
instructions, after the Wash, Wash/Rinse or Rinse only program has ended.
• If you do not specify the water level, then Medium will be automatically selected.
Rinse Only
Press the Rinse button to
select the desired number
of Rinses.
Rinse and Spin Only
Press the Rinse button to
select the desired number
of Rinses.
Press the Spin button to
select the desired Spin
speed intensity.
27
Spin Only
Press the Spin button to
select the desired Spin
speed intensity.
Drain Only
Can be used when draining
of the remaining tub water
in required.
Turn on the machine and
press the Spin button then
press START/PAUSE. The
POWER can then be turned
off when the remaining
water has drained just
before the Spin starts.