Installing The Canopy; Installing The Blades - Hunter 50256 Installation Manual

1886
7
Ceiling Bracket Downrod

Installing the Canopy

Lift the canopy into place so that
the screw holes are aligned.

Installing the Blades:

Secure each blade to a blade iron as shown using the blade nuts, found in the
hardware bag, and the blade assembly screws, found in the
Repeat x3
Hanging Fan Wiring
Insert the two canopy screws
found in the hardware bag.
hardware bag.
Canopy Blades
x2
Canopy Screw
bag
x9
bag Blade Screw
x9
Blade nut
bag
Upper Switch Housing Reverse