Led Explanation For The Access Point Mode - TP-Link RE815X User Manual

Chapter 6
6 3

LED Explanation for the Access Point Mode

When the extender works in the Access Point mode, you can check its working status
by following the LED Explanation table below.
Name Status
On/Off
(Power) Blinking
Blinking
(Signal)
2.4G On/Off
5G On/Off
Indication (For Access Point Mode)
The extender is on or off.
The system is starting up or firmware is being upgraded.
On A WPS connection is established.
WPS connection is in progress. This may take up to 2 minutes.
A WPS connection has been established for more than 5
Off
minutes or WPS connection failed.
The 2.4 GHz wireless band is enabled or disabled.
The 5 GHz wireless band is enabled or disabled.
Use Your Extender as an Access Point
36