Operating temperature, storage temperature, and other specifications can be found on the product page at https://www.tp-link.com. TP-Link Community is provided for you to discuss our products and share knowledge at https://community.tp-link.com/. Our Technical Support contact information can be found at the Contact Technical Support page at https://www.tp-link.com/support.
Chapter Get to Know About Your Extender This chapter introduces what the extender can do and its appearance. It contains the following sections: • Product Overview • Appearance...
Get to Know About Your Extender Product Overview Bring Dead Zones Back to Life Tired of Wi-Fi “dead zones”? The TP-Link extender is connected to your router wirelessly, strengthening its signal and expanding its coverage into areas that could not otherwise be reached.
Chapter 1 Get to Know About Your Extender 1 2 1 LED Explanation You can check the extender’s working status by following the LED Explanation table. Name Status Indication On/Off The extender is on or off. (Power) Blinking The system is starting up or firmware is being upgraded. The extender is connected to your router’s wireless Solid blue network and is in a suitable location.
Chapter Set Up Internet Connection This chapter introduces how to boost your host wireless coverage. Please follow the step-by-step instructions to set up the internet connection. It contains the following sections: • Power On the Extender • Set Up the Extender...
For safety, only plug the extender in upright direction as shown below. Set Up the Extender There are three ways to set up the extender: via the TP-Link Tether app, via a web browser, or via the WPS button. 2 2 1 Method 1: Via the TP-Link Tether App 1.
Page 10
Chapter 2 Set Up Internet Connection 3. Tap the + icon on the upper-right corner and select Range Extender. 4. Follow app instructions to set up your extender. 5. (Optional) If your host router supports OneMesh, you can enable Join Onemesh copy the router’s wireless settings for seamless roaming.
Chapter 2 Set Up Internet Connection Tip: For more intuitive location assistance, access extender settings via Tether and go to Tools > Location Assistant. You can also manage your extender via Tether, such as controlling LEDs, sharing passwords of your networks and blocking devices.
Page 12
Chapter 2 Set Up Internet Connection Note: If the login window does not appear, please refer to FAQ. 2 ) Select your host router’s 2.4GHz SSID (network name), enter its password (NOT the password you just created for management), and click Next. 3 ) Select your host router’s 5GHz SSID (network name), enter its password (NOT the password you just created for management), and click Next.
Page 13
Next. Tip: If you connect the extender to a TP-Link OneMesh router, the extender will automatically join the router’s OneMesh network and copy the router’s wireless settings. For more information, refer to OneMeshTM with Seamless Roaming.
Chapter 2 Set Up Internet Connection Enjoy! Connect to the extended network and enjoy the internet. 2 2 3 Method 3: Via the WPS Button Use this way if your router has a WPS button. The button might look like one of these: 1.
Page 15
WPS connection is successful. Note: If the LED does not turn solid on, try again or refer to Method 1: Via the TP-Link Tether App Method 2: Via a Web Browser. 3. If the extender connects to a dual band router, repeat steps 1 and 2 above to connect to the other band.
Page 16
Chapter 2 Set Up Internet Connection Suitable location Too far from router No connection Router Devices Halfway Tip: To minimize signal interference, please choose a location which is far away from Bluetooth devices and other household electronic devices, such as cordless phones, microwave ovens and baby monitors. Enjoy! Connect to the extended network and enjoy the internet.
Chapter OneMesh with Seamless Roaming This chapter introduces the TP-Link OneMesh feature. It contains the following sections: • What‘s a OneMesh Network • How to Set Up a OneMesh Network...
Set up a OneMesh network with a push of WPS buttons. Manage all network devices on the Tether app or at your router’s web management page. To check full list of TP-Link OneMesh devices, scan the QR code, or visit https://www.tp-link.com/One-Mesh/compatibility.
Chapter 3 OneMeshTM with Seamless Roaming How to Set Up a OneMesh Network Once the extender is connected to a TP-Link OneMesh router via any method, the extender will automatically join the router’s OneMesh network and copy the router’s wireless settings. You can manage all mesh devices in the OneMesh network all on your router’s web page.
TP-Link Cloud service provides a better way to manage your cloud devices. Log in to your cloud device with a TP-Link ID, and you can easily monitor and manage your home network when you are out and about via the Tether app on your smartphone or tablet.
Manage the User TP-Link IDs. • Once you have registered a TP-Link ID on the web management page, you can only register another TP-Link ID via the Tether APP. Please refer to Manage the Extender via the TP-Link Tether App to install the app and register a new one.
Password. 2. Enter the current password, then a new password twice. And click Save. Manage the User TP-Link IDs The TP-Link ID used to log in to the extender for the first time will be automatically bound as the Admin account.
3. Click , enter another TP-Link ID as needed and click Save. Note: If you need another TP-Link ID, please register a new one via the Tether app. Please refer to Manage the Extender via the TP-Link Tether App to install the app and register a new TP-Link ID.
Tether” or simply scan the QR code to download and install the app. 2. Launch the Tether app and log in with your TP-Link ID. Note: If you don’t have a TP-Link ID, create one first. 3. Connect your device to the extender’s or host router’s wireless network.
Chapter Customize Your Network This chapter guides you on how to configure network settings that are available for this extender. It contains the following sections: • Check Internet Status • Configure Wireless Network • Change LAN Settings • Adjust Wi-Fi Coverage •...
You can view the internet status of your extender to check whether you have successfully set up the extended network(s). 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings >...
If the extender is in your router’s OneMesh network, it will automatically copy wireless settings from your router. No wireless settings is needed for the extender. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender.
Page 28
Chapter 5 Customize Your Network 5. Click Save. • To enable or disable the extended network: 1. Go to Settings > Wireless > Extended Network. 2. Extended networks are enabled by default. If you want to disable the wireless function of a certain band, just clear the Enable checkbox.
If the IP address conflicts with another device on your local network or your network requires a specific IP subnet, you can change it. 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings >...
If the extender is in your router’s OneMesh network, it will automatically copy access control settings from your router. No access control settings is needed for the extender. 1. Visit http://tplinkrepeater.net and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings >...
Page 31
Chapter 5 Customize Your Network 2. Select the device to be blocked in the Online Devices table by ticking the corresponding checkbox. 3. Click Block and the selected device(s) will be added to the Devices in Blacklist table. 4. Click in the Devices in Blacklist table to set the...
5GHz bands are both enabled. Additionally, if you are going to disable the 2.4GHz network, it’s recommended to first make sure all your wireless devices support 5GHz network connection. 1. Visit http://tplinkrepeater.net and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings >...
Page 33
Chapter 5 Customize Your Network 4. Select the Auto mode. The extender will decide which band the high-speed network will work on based on its wireless connection to your host router. The other band will be disabled. 5. Click Save.
Chapter Manage Your Extender This chapter presents how to manage and maintain your extender. It includes the following sections: • Set System Time • Control LEDs • Set Power Schedule • Upgrade the Firmware • Backup and Restore Configuration Settings •...
Power Schedule function. If you have enabled the Daylight Saving Time feature, the system time will be sychronized with the daylight saving time you configure. 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender.
Chapter 6 Manage Your Extender 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings > System Tools > Control. • To turn off the LEDs: Disable Status.
• Do NOT power off the extender during the firmware upgrade. • To upgrade the firmware online: 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. When the latest firmware is available for your extender, the update icon will display in the top-right corner of the page.
To upgrade the firmware locally: 1. Download the latest firmware file for the extender from our website www.tp-link.com. 2. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 3. Go to Settings >...
Chapter 6 Manage Your Extender • To backup configuration settings: Click Backup to save a copy of the current settings to your local computer. A ‘.bin’ file of the current settings will be stored on your computer. • To restore configuration settings: 1.
Chapter 6 Manage Your Extender 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings > System Tools > Admin Account. 3. Enter the old password. Then enter the new password twice (case-sensitive) and click Save.
Chapter More Features of Your Extender This chapter explains how to use the extender as a wireless adapter and as an access point. It contains the following sections: • Use Your Extender as a Wireless Adapter • Transform Your Existing Wired Network to a Wireless One...
The extender can work as an access point, transforming your existing wired network to a wireless one. 7 2 1 Set Up the Extender as an Access Point 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. Click Mode in the top right corner of the page.
Page 44
Chapter 7 More Features of Your Extender 4. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 5. Go to Quick Setup to configure your extender. 1 ) Configure your wireless settings and click Next.