How To - Life Fitness 4500HR Service Manual

Life Fitness Model 4500HR Treadmill
How To ... REMOVE AND REPLACE THE VENT COVER
Tools Required: Phillips Screwdriver
Step 1
Turn the power OFF at the ON/OFF switch and then unplug the unit from the electrical outlet.
Step 2
Use a phillips screwdriver to remove the two SCREWS securing the sides of the VENT COVER to the MOTOR
COVER.
Step 3
Grasp the VENT COVER in the center and pull away from the MOTOR COVER to disengage the two snap down
CLIPS located on the inside, center of the VENT COVER.
Step 4
Position the new VENT COVER into place and reverse steps 1 through 3 to return all parts to their proper
locations.
1