Download Print this page

Speco PBM60AT Instruction Manual page 8

60 watt rms public address amplifier , 60 watt rms public address amplifier with tuner, 60 watt rms public address amplifier with tuner/cd/usb
Hide thumbs Also See for PBM60AT:

Advertisement

are on hold, or for using the features of the phone system to send a page via a specific
output on the phone system. Installation instructions vary widely by manufacturer. If
unsure, please contact a professional.
Music-on-hold (MOH) Volume Knob:
15)
a. This knob will allow you to adjust the volume of the MOH output.
Music-on-hold (MOH) Output:
16)
a. These terminals allow output of the amplifier's audio to another source, such as
a telephone paging system.
i. 600 Ohms/1V
ii. 8 Ohms/1W
Telephone Paging Inputs:
17)
a. These inputs will allow you to utilize your amplifier with a telephone paging system
for purposes of paging.
Telephone Paging Volume Knob:
18)
a. If connected to a phone system, this will allow adjustment of the incoming audio.
AM Antenna Input:
19)
a. This terminal will allow you to connect an AM antenna for your module.
b. The antenna will only be included with a PBM60AT and PBM60AU.
AC Power Inlet:
20)
a. Connect your included power cord here, carefully following all safety instructions.
External Fuse:
21)
a. T10AL, 250V fuse can be replaced here.
Zone Output Switch:
22)
a. Change the format of the zoned commercial outputs between 25V and 70V.
VERY IMPORTANT: NEVER switch output while amplifier is active. NEVER switch output and
power amplifier if incorrect speakers are connected to the output. Damage can occur to the
amplifier and/or speakers and the warranty will be void. If unsure, please consult a
professional.
Single-Zone Constant Impedance Outputs
23)
a. This amplifier comes complete with both constant voltage and constant impedance
outputs. Only one type of output may be used at a time. Attempting to use both
simultaneously could damage the amplifier and/or speakers and would void the
warranty.
b. This amplifier offers single-channel 4 Ohm, 8 Ohm and 16 Ohm outputs
XLR Line Output:
24)
a. Utilize this XLR output to connect the amplifier to a booster amplifier with a
matching input
RCA Line Output:
25)
a. Utilize this RCA output to connect the amplifier to another amplifier with RCA inputs
For more information contact Speco Technologies
200 New Highway, Amityville, NY 11701• Toll Free: 1-800-645-5516•Fax: 631-957-9142 or 631-957-3880•www.specotech.com
8

Advertisement

loading

This manual is also suitable for:

Pbm60aPbm60au