Tire Designations - Chevrolet Suburban 2014 Owner's Manual

DOT Tire Date of
Manufacture The last four
:
digits of the TIN indicate the tire
manufactured date. The first two
digits represent the week
(01-52) and the last two digits,
the year. For example, the third
week of the year 2010 would
have a four-digit DOT date
of 0310.
(E) Tire Identification Number
(TIN) The letters and numbers
:
following the DOT code are the
Tire Identification Number (TIN).
The TIN shows the
manufacturer and plant code,
tire size, and date the tire was
manufactured. The TIN is
molded onto both sides of the
tire, although only one side may
have the date of manufacture.
(F) Tire Ply Material
:
of cord and number of plies in
the sidewall and under the tread.
(G) Single Tire Maximum
Load Maximum load that can
:
be carried and the maximum
pressure needed to support that
load when used as a single. For
information on recommended
tire pressure see Tire Pressure
on page 10-49 and Vehicle Load
Limits on page 9-15.

Tire Designations

Tire Size
The examples show a typical
passenger vehicle and light
truck tire size.
The type
Passenger (P Metric) Tire
Vehicle Care
(A) Passenger (P Metric) Tire
The United States version of a
metric tire sizing system. The
letter P as the first character in
the tire size means a passenger
vehicle tire engineered to
standards set by the U.S. Tire
and Rim Association.
(B) Tire Width The three digit
:
number indicates the tire section
width in millimeters from
sidewall to sidewall.
(C) Aspect Ratio A two digit
:
number that indicates the tire
height to width measurements.
For example, if the tire size
aspect ratio is 75, as shown in
item C of the tire illustration, it
would mean that the tire's
sidewall is 75 percent as high as
it is wide.
10-45
: