Advertisement
Module Bay:
1)
a. This will be empty for the PBM120A.
b. This will contain a factory-installed Tuner/CD/USB/SD player for the PBM120AU
(Page 9).
c. This will contain a factory-installed AM/FM Tuner for the PBM120AT (Page 11).
Zone Selector:
2)
a. Turn specific speaker runs on or off.
b. If a zone is turned on, the LED above the zone button will illuminate.
Volume Level Indicator:
3)
a. This display will indicate the level of volume of the amplifier.
b. Volume can be changed either using the Master Volume Knob (#9) or by using
the IR remote control
IR receiver:
4)
a. Aim your IR remote control at this window to control the amplifier.
b. Range of the IR remote can be extended by using an optional IR repeater, such
as the Speco Technologies Part Number IRRPTKIT.
Microphone Volume Control Knobs:
5)
a. Turn the knob left to decrease the microphone volume relative to other inputs.
b. Turn the knob right to increase the microphone volume relative to other inputs.
Auxiliary Input Volume Control Knobs:
6)
a. Turn the knob left to decrease the AUX input volume relative to other inputs.
b. Turn the knob right to increase the AUX input volume relative to other inputs.
Tone Controls:
7)
a. Turning the Bass knob left or right will increase or decrease the bass of all inputs.
b. Turning the Treble knob left or right will increase or decrease the treble of all inputs.
Source Select Button:
8)
a. Pushing this button will alternate between the auxiliary inputs and then module
input as the main source.
b. If a module is not installed (PBM120A), no audio will play if module is selected.
Master Volume Knob:
9)
a. Turn the knob to the left to decrease the volume of all inputs and sources.
b. Turn the knob to the right to increase the volume of all inputs and sources.
System Lock Indicator:
10)
a. This amplifier comes complete with a feature that will lock the functions of the front
panel so that only the IR remote can control the amplifier.
b. This is useful for when the amplifier is installed in a public area and unauthorized
personnel or customers might have access to the volume, source, etc.
Standby Power Button:
11)
a. This button will enable the amplifier to enter and exit standby mode.
b. When in standby mode, the LED light above the button will illuminate.
For more information contact Speco Technologies
200 New Highway, Amityville, NY 11701• Toll Free: 1-800-645-5516•Fax: 631-957-9142 or 631-957-3880•www.specotech.com
6
Advertisement
