Samsung AR HV5N Series User & Installation Manual page 33

Accessories in the outdoor unit case
Rubber Leg (4)
• T he flare nuts are attached to the end of each pipe of an evaporator or a service port.
Use the nuts when connecting the pipes.
• T he wire assembly cable is optional. If it is not supplied, use the standard cable.
• T he drain plug and rubber leg are only included when the air conditioner is supplied without the assembly pipe
as seen in the picture below.
Optional accessories
Insulated Assembly Pipe,
Insulated
Ø9.52 mm x 5 m (1)
Assembly Pipe,
Ø6.35 mm x 5 m (1)
Putty 100 g (1) Pipe Clamps A (3) Pipe Clamps B (3)
3-wire
Power Cable (1) Assembly Cable (1)
✴✴ 12/18/24 ✴✴ ✴✴
• I f these accessories are supplied, they will be in the accessory box.
Tools required for installation
General Tools
• Vacuum Pump(Backward flowing prevention)
• Torque Wrench
• Screw Driver
Tools for test operations
• Thermometer
NA_GOOD_A3050_IB&IM_EN_DB68-04387A-00.indd 33
Insulated Assembly Pipe,
Ø12.70 mm x 5 m (1)
✴✴ 10/13 ✴✴ ✴✴ 18 ✴✴
2-wire 3-wire
Assembly Cable (1)
12/18/24 ✴✴ ✴✴ 12/18/24 ✴✴
• Pipe Cutter • Reamer
• Spanner • Drill
• Resistance Meter • Electroscope
English-33
Insulated Assembly Pipe,
PE T3 Foam Tube
Ø15.88 mm x 5 m (1)
Insulation (1)
✴✴ 24 ✴✴
M4 x 25 Tapped
Cement Nails (6)
Screws (6)
Drain Plug (1)
• Manifold Gauge • Stud Finder
• Pipe Bender • Spirit Level
• L Wrench • Measuring Tape
Vinyl Tapes (2)
Drain Hose,
length 2 m (1)
11/26/2013 9:56:12 PM