Opening the oven door during cooking
Operation is suspended.
†
after closing the oven door. The programme will then continue.
Pausing operation
Press the
†
button. The oven is paused,
the
button again, operation continues.
†
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Series of operations
You can use the SeriesOperations function to set up to three
operating modes and then start.
Requirement: you must set a cooking time for each step.
Can be used with
All types of heating
■
Exception: "MicroCombi gentle" and "MicroCombi intensive"
heating types are not suitable.
Microwave
■
Combination operation
■
Ovenware
Always use microwave-safe, heat-resistant ovenware.
Setting a series of operations
Press the
2
button.
1.
series of operations appears on the status bar. The 1 is
2
highlighted. The first operation in the series can be set.
3UHKHDW
6HULHV RI RSHUDWLRQV
7RSERWWRP KHDWLQJ &
Time-setting options
You can call up the time-setting options menu by pressing
the
0
button. The following functions are available:
If the oven is switched off:
Setting the timer
■
Setting the clock
■
If the oven is switched on:
Setting the timer
■
Setting the cooking time
■
Setting a later end time
■
Setting the time-setting options in brief
Press the
0
button to open the menu.
1.
Switch to the required function, using the
2.
setting area is light, the text is dark.
Use the rotary selector to set the clock or cooking time.
3.
Press the
button to close the menu.
0
4.
12
flashes. Press the
†
button again
†
flashes. Press
or
button. The
¾
¿
Cancelling operation
Press and hold the
†
button until "Select function" appears in
the status line. You can make new settings.
Setting a later end time
See the section entitled Time-setting options, Setting a later end
time.
Select and set the desired operating mode.
2.
Press the
button again.
2
3.
The 2 is highlighted. The second operation in the series can
be set.
Select and set the desired operating mode.
4.
Press the
button again.
2
5.
The 3 for the third operation in the series is highlighted:
Select and set the desired operating mode.
6.
Press the
button.
†
7.
Appliance operation begins. The operation in the series
currently in progress and the cooking time appear in the status
bar on the left-hand side. On the right, you will see the total
cooking time counting down.
The cooking time has elapsed
A signal sounds. The series of operations is finished. The status
bar shows
x
0:00. You can cancel the signal before it has
finished sounding by pressing the
A detailed description of how to adjust each individual function
is provided below.
Setting the timer
The timer runs independently of the oven. You can use it as a
kitchen timer and set it at any time.
Press the
button.
0
1.
The time-setting options menu opens.
Set the running time for the timer using the rotary selector.
2.
Press the
button to close the menu.
0
3.
The display returns to its previous state. The
timer appears, and the time can be seen counting down.
When the time has elapsed
A signal sounds. The display shows
the signal earlier by pressing the
to close the time-setting options menu.
button.
0
symbol for the
U
0:00. You can cancel
U
button. Press the
button
0
0