Panasonic Pure IP-PBX KX-TDE100 Programming Manual page 35

Value Range
Port number
Connection
Indicates the port status.
This column offers two ways to open the screen to select the port command:
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click Command.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
T.38 FAX QoS Available
Specifies the type of value to be stored in the ToS field in the IP header when using the T.38 protocol.
Value Range
ToS, DSCP, HEX
T.38 FAX QoS-ToS Priority
Specifies the priority level in the ToS field when using the T.38 protocol.
Value Range
0–7
T.38 FAX QoS-ToS Type
Specifies the ToS type in the ToS field when using the T.38 protocol.
Value Range
Normal, Monetary Cost, Reliability, Throughput, Delay
T.38 FAX QoS-DSCP
Specifies the value in the ToS field by a DSCP for DiffServ when using the T.38 protocol. This setting is
compulsory when DSCP is selected in T.38 FAX QoS Available.
Value Range
0–63
T.38 FAX QoS-HEX
Specifies the value in the ToS field by a hexadecimal number when using the T.38 protocol. This setting is
compulsory when HEX is selected in T.38 FAX QoS Available.
Value Range
00–FF
Programming Manual for Virtual SIP Trunk Card
3.1.11 T.38 Option
35