Panasonic Pure IP-PBX KX-TDE100 Programming Manual page 33

RTCP Packet Sending Ability
Specifies whether to enable each port to send RTCP packets.
Value Range
Disable, Enable
RTCP Packet Interval
Specifies the interval time until the next RTCP packet is sent.
Value Range
5–60 s
3.1.10 T.38
Shelf (KX-TDE600 only)
Indicates the shelf position (reference only).
Value Range
Shelf type
Slot
Indicates the slot position (reference only).
Value Range
Slot number
Port
Indicates the port number (reference only).
Value Range
Port number
Connection
Indicates the port status.
This column offers two ways to open the screen to select the port command:
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click Command.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
T.38 FAX Max Datagram
Specifies the maximum datagram size when using the T.38 protocol.
Programming Manual for Virtual SIP Trunk Card
3.1.10 T.38
33