Asus X99-E WS/USB 3.1 Manual page 68

•
•
•
•
* LAN ports LED indications
Activity Link LED
Status
Off
Orange
Orange (Blinking) Data activity
Orange (Blinking
then steady)
You can disable the LAN controllers in BIOS. Due to hardware design, the LAN1 port's
LEDs may continue to blink even when disabled.
** Audio 2, 4, 6, or 8-channel configuration
Port
Light Blue
Lime
Pink
Orange
Black
2-14
E13611_X99-E_WS_USB31_UM_V4.indb 14
The plugged USB 3.0 device may run on xHCI mode or EHCI mode, depending on the
operating system's setting.
USB 3.0 devices can only be used as data storage only.
We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance for your USB 3.0 devices.
Due to the design of the Intel
USB 2.0 and USB 3.0 ports are controlled by the xHCI controller. Some legacy USB
devices must update their firmware for better compatibility.
Description
No link
Linked
Ready to wake up
from S5 mode
Headset 4-channel
2-channel
Line In Line In
Line Out Front Speaker Out
Mic In Mic In
– –
– Rear Speaker Out
X99 series chipset, all USB devices connected to the
®
Speed LED
Status Description
Off 10 Mbps connection
Orange 100 Mbps connection
Green 1 Gbps connection
6-channel
Line In
Front Speaker Out
Mic In
Center/Subwoofer
Rear Speaker Out
Chapter 2: Basic Installation
ACT/LINK SPEED
LED LED
LAN port
8-channel
Side Speaker Out
Front Speaker Out
Mic In
Center/Subwoofer
Rear Speaker Out
10/27/2017 16:56:11