Tunturi Star Fit B100 User Manual page 16

Hide thumbs Also See for Star Fit B100:
Table of Contents

Advertisement

Available languages

Available languages

English
Adjusting the handlebar
The handlebar can be adjusted according to the height
and the exercise position of the user.
Loosen the handlebar adjustment knob.
-
Move the handlebar to the required position.
-
Tighten the handlebar adjustment knob.
-
Power supply (Fig. E)
The trainer is powered by an external power supply.
Refer to the illustration to locate the trainer power
input.
NOTE
Connect the power supply with the trainer
before connecting it to the wall outlet.
Always remove power cord when
machine is not in use.
Console (fig F)
1. Display
2. Buttons
3. Tablet/ book support
CAUTION
Keep the console away from direct sunlight.
Dry the surface of the console when it is covered
with drops of sweat.
Do not lean on the console.
Only touch the display with the tip of your finger.
Make sure that your nails or sharp objects do not
touch the display.
NOTE
The console switches to standby mode when the
equipment is not used for 4 minutes.
Explanation Display functions
Time
Without setting the target value, time will count up.
-
When setting the target value, time will count down
-
from your target time to 0 and alarm will sound or
flash.
Without any signal being transmitted into the
-
monitor for 4 seconds during workout, time will
STOP
Range 0:00~99:59
-
Speed
Displays current training speed.
-
Maximum speed is 99.99 KM/H
Without any signal being transmitted into the
-
monitor for 4 seconds during workout, SPEED will
display "0.0"
RPM
Displays the Rotation Per Minute.
-
Display range 0~10~500.
Without any signal being transmitted into the
-
monitor for 4 seconds during workout, RPM will
display "0"
Level
Shows tension level setting.
-
Range: 1 ~ 16
-
Distance
Without setting the target value, distance will count
-
up.
When setting the target value, distance will count
-
down from your target distance to 0 with an alarm
sound or flash.
Range 0.00~99.99
-
Calories
Without setting the target value, calorie will count
-
up.
When setting the target value, calories will count
-
down from your target calorie to 0 with an alarm
sound or flash.
Range 0~999.9.
-
NOTE
This data is a rough guide for comparison of
different exercise sessions which cannot be used
in medical treatment
1 6

Advertisement

Chapters

Table of Contents
loading

Table of Contents