Philips NORELCO S7371 Manual page 31

1
371_422200259961_091416.indd 31
C
3 Remove the shaving heads from the
shaving head holder and discard.
DO NOT discard the retaining ring.
C
4 Place new shaving head in the holder.
Make sure the notches on both sides of the
shaving heads fit exactly onto the projections in
the shaving head holder.
C
5 Hold the shaving head holder in your hand
and place the retaining ring on the shaving
2
head holder (1). Turn clockwise (2) to
reattach the retaining ring.
Do not place the shaving head holder on a
surface, as damage may occur.
C
NOTE: Each retaining ring has two recesses that
fit exactly into the projections of the shaving
head holder. Turn the ring clockwise until you
hear a click to indicate the ring is fixed into
place.
6 Repeat this process for the other two
cutters and combs.
7 Reattach the shaving head holder to the
bottom part of the shaving unit.
ENGLISH
31
9/14/16 11:06 A