Philips NORELCO S7371 Manual page 27

3
371_422200259961_091416.indd 27
Connect the small plug to the SmartClean
1
System. Connect the power plug into any
100V to 240V AC outlet. Use only the
power cord provided.
2. Place the SmartClean System on a flat,
level surface. Make sure the seal has been
removed from the cleaning cartridge (see
'Preparing SmartClean System For Use').
C
3 Press the top cap down to open the
SmartClean System.
C
4 Shake off any excess water from shaver
before placing in the SmartClean System.
C
5 Hold the shaver head side down above the
shaver holder.
C
6 Place the shaver into the holder (1), push
1
shaver back (2) and press down the top
2
cap to connect the shaver (3) (click).
The shaver will only fit in the SmartClean System
in one direction.
ENGLISH
27
9/14/16 11:06 A