Table of Contents
Advertisement
To connect to a satellite receiver, cable box or PAY-TV decoder with a 21-pin scart jack
Connect the VCR and the satellite receiver, cable box or PAY-TV decoder with an optional 21-pin scart cord.
PAY-TV decoder
DECODER
21-pin scart cord
(not supplied)
To enjoy the sound and picture from the VCR (VCR mode)
Press TV/VIDEO on the remote control to display "VCR" on the display window. The VCR automatically switches to VCR mode
when the VCR is turned on.
To watch a program on the TV while recording another program on the VCR (TV mode)
Select the program to be watched using the TV's tuner. The sound and picture of the channel selected for recording are
received by the VCR.
VCR
During power on
VCR mode
TV mode
During power off
∗When the VCR is set to the TV mode and the PAY-TV channel is selected, the signals are scrambled even when PAY-TV is
selected by the TV's tuner. In this case, either set the VCR to the VCR mode or switch the TV's input signals to AV input.
DECODER
or
EURO AV2
DECODER
EURO AV1
AUDIO/
VIDEO
Notes
• If your satellite receiver or cable box has more than two scart jacks, use
the TV jack to connect to the VCR and not the VIDEO jack. Otherwise you
may not receive a proper picture.
• If you connect the VCR to a cable box or satellite receiver, please refer to
the operating instruction of those appliances.
TV
AV input selected
Input from TV's tuner∗
–
Input from TV's tuner
Satellite receiver/cable box
VIDEO
TV
Antenna cord
(not supplied)
ENTREE
ANTENNE
AERIAL
SORTIE
ANTENNE
RF.OUT
Antenna cord
(supplied)
21-pin scart cord (not supplied)
TV
To antenna jack
5
ENGLISH
Advertisement
Table of Contents
