Table of Contents
Advertisement
12. Connect the OCuLink cables to the motherboard. Ensure to connect the cable
connected to OCUPCIE1 to the U.2_4 connector on your motherboard, and the cable
connected to OCUPCIE2 to the U.2_3 connector on your motherboard.
13. Connect the fan extension cable to the FRNT_FAN5 connector on your motherboard.
14. Connect the power cable to a 4-pin molex connector from the power supply unit.
15. Prepare your PIKE II card.
16. Connect a Mini SAS HD cable to the Mini SAS HD connector closest to the metal frame
on your PIKE II card for the four (4) top storage bays.
17. Connect a Mini SAS HD cable to the other Mini SAS HD connector for the four (4)
bottom storage bays.
2-28
Connect to riser card fan
Connect to OCUPCIE2
Connect to OCUPCIE1
Chapter 2: Hardware Setup
Advertisement
Table of Contents
