Table of Contents
Advertisement
2.6.3
(optional) Installing a passive graphics card
Unplug the power cord before installing or removing an expansion card. Failure to do so
may cause severe damage to the motherboard and other system components!
1.
Remove the GPU bar and air duct from the chassis, please refer to section Air Duct for
more details.
2.
Release the screws on the metal slot
cover for all the metal covers, then
remove all the metal slot covers.
3.
Install the bundled closed metal slot
covers into the slots you do not wish to
install your passive graphics card in.
The closed metal slots are bundled
with the optional passive fan module.
4
Install your passive graphics card into
the reserved empty expansion slot(s),
then secure it using the screws removed
earlier.
The passive graphics card is
purchased separately.
ASUS E900 G4
2-21
Advertisement
Table of Contents
