Nokia 2760 Service Manual page 32

Page 2 –10
PK-1
PK-1 is a hardware protection key with a USB interface. It has the same
functionality as the PKD-1 series dongle.
PK-1 is meant for use with a PC that does not have a series interface.
To use this USB dongle for security service functions please register
the dongle in the same way as the PKD-1 series dongle.
PKD-1
SW security device is a piece of hardware enabling the use of the
service software when connected to the parallel (LPT) port of the PC.
Without the device, it is not possible to use the service software.
Printer or any such device can be connected to the PC through the
device if needed.
RJ-188
The jig is used for soldering and as a rework jig for the system module.
It is made of lead-free rework compatible material.
RJ-51
To be used with ST-30!
RJ-72
To be used with rework stencil ST-28.
COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
Service Tools and Service Concepts
Software protection
key
SW security device
Soldering jig
Rework jig
Rework jig
RM-258; RM-259
Issue 1