Change The Vlan Profile For A Lan - NETGEAR SXK30 User Manual

Orbi pro wifi 6 mini dual-band mesh system

Table of Contents

Orbi Pro WiFi 6 Mini Router SXR30 and Orbi Pro WiFi 6 Mini Satellite SXS30

Note the following:

• If two LAN ports form a link aggregation group (LAG), they must be assigned to the

same VLAN profile.

• You can assign the WAN port to any VLAN profile.

To assign a port to another VLAN profile on the router (base) or satellite:

1. Launch a web browser from a computer or mobile device that is connected to your

Orbi network.

2. Enter orbilogin.com.

A login window displays.

If your browser does not display a login window but displays a security warning and

does not let you proceed, see Resolve a browser security warning on page 27.

3. Enter the admin user name and password.

The user name is admin. The password is the one that you specified the first time

that you logged in. The user name and password are case-sensitive.

The BASIC Home page displays.

4. Select ADVANCED > Advanced Setup > VLAN / Bridge Settings.

The VLAN / Bridge Settings page displays.

For the router (base) and each satellite, the ports display on the page. The ports that

are connected are outlined in blue. Unused ports are outlined in gray.

5. In either the Base (router) or Satellite section, for the Ethernet port that you want to

change, select a VLAN profile from the VLAN Profile menu.

6. Click the Apply button.

Your settings are saved.