Zipper Insertion; Inserting A Centered Zipper - Brother 888-L01 Operation Manual

Zipper Insertion

Zipper Insertion
• Using the table below, refer to "Using the utility
stitch tables in the "Sewing" section" in the "Basic
operations" section.
Stitch name Stitch
Straight stitch (Middle)
* Stitch patterns can be selected directly by pressing the
numeric keys on the machine during preset utility stitch
mode. Refer to "Basic operations" section.

Inserting a centered zipper

Stitching is sewn on both pieces of fabric butted against each
other.
1
1 Right side of fabric
2 Stitching
3 End of zipper opening
a Attach zigzag foot "J".
b Sew straight stitches up to the zipper opening.
With the right sides of the fabric facing each other, sew
reverse stitches after reaching the zipper opening.
c Using a basting stitch, continue sewing to the edge of
the fabric.
1
2
1 Basting stitching
2 Reverse stitches
3 Wrong side of fabric
4 End of zipper opening
S-20
Stitch number
* *
1-03 03 03 J, I
2
3
3
4
d Press open the seam allowance from the wrong side of
the fabric.
1 Wrong side of fabric
e Align the seam with the center of the zipper, and then
baste the zipper in place.
1
1 Wrong side of fabric
2 Basting stitching
3 Zipper
Remove about 5 cm (2 inches) from the end of the
f
basting on the outside.
2
3
1 Wrong side of fabric
2 Zipper basting
3 Outside basting
4 5 cm (2 inches)
g Attach the presser foot holder to the right pin of zipper
foot "I".
1
I
1 Pin on the right side
2 Needle drop point
1
2
3
4
1
2