Troubleshooting - Midea 11QT User Manual

TROUBLESHOOTING

Problem
No power
Display shows
E1 or E2
Cannot
activate Sync
Finish
Cannot select
function
Cannot pause
single cavity
Food
undercooked
Possible Reasons
• Improper power cord and
outlet connection
• The unit is not operating
properly
• Both the upper basket and
lower oven have not been
programmed
• Not using knob
• Sync Finish is activated
• The upper basket and lower
oven are operating at the
same time
• Food not placed in an even
layer
Solutions
• Check that the power cord is
firmly plugged into outlet. If this
cannot solve the problem, please
contact the Customer Service
Center at +1-866-646-4332.
• Contact the Customer Service
Center at +1-866-646-4332.
• To activate Sync Finish a
function must be selected for
both cavities. Then, the
button will appear. If Sync Finish
is activated the Sync Finish
indicator
OPERATION INSTRUCTIONS.
• After touching
knob can be rotated to change
the function and pushed to
select a function. The actual
functions cannot be touched for
selection. See OPERATION
INSTRUCTIONS.
• While Sync Finish is activated,
either
pause, and resume both cavities
to ensure that both cavities
finish at the same time. If you
wish to control each cavity
independently, do not use Sync
Finish.
• Overall, the Two-Zone Air Fryer
Oven is faster than cooking two
consecutive batches in the same
air fryer.
However, if the upper basket
and lower oven are operating
simultaneously, cook times will
need to be increased. See
COOKING.
• For best cooking performance,
place food in an even layer with
no overlapping. See COOKING.
30
will be lit up. See
or the
button will start,