Table of Contents
Advertisement
8
en | Introduction
3
Introduction
The Electro-Voice Expandable Vertical Array (EVA) line-array modules represent an important
step in line-array technology for small- and medium-scale fixed-installation sound
reinforcement.
The four base models are designed to simplify the physical assembly of a line array. Also,
arrays of EVA full-range modules are designed to be powered from one amplifier channel.
Sophisticated passive networks provide the necessary crossover and EQ functions.
The individual loudspeaker drivers, Hydra™ waveform converters, acoustic waveguides,
enclosures and rigging hardware were all designed specifically for the EVA product line. The
goal is to achieve the highest acoustic output with the highest fidelity and produce a precise
wavefront from each element to achieve state-of-the-art line-array performance.
The EVA subwoofer modules complement both the appearance and performance of the EVA
full-range modules in applications where additional low-frequency output is required from a
flown array.
EVA loudspeaker arrays present an affordable option for projects that require a line array
approach, but have limited budgets. At the same time, the performance of fully passive EVA
systems rivals that of more expensive and complex line arrays. EVA was designed for
outstanding sound quality with only minor equalization for room compensation, without any
speaker-specific settings.
But Electro-Voice also offers EVA loudspeaker settings that can be loaded into Dynacord
amplifiers and processors by using SONICUE System Software. The settings add protective
limiters to reduce the risk of loudspeaker failure, and allow higher drive levels.
2023-01 | 04 | F01U196199
Installation manual
EVA Expandable Vertical Array
Electro-Voice
Advertisement
Table of Contents
