PUMP
HEATER
1 Lower cover is disassembled.
2 Take out PWB assembly in front of washer.
3 Remove 3 clamps from the each hose.
4 Remove 4 screws from the base cabinet.
5 Disconnect the wire of pump.
6 Take out drain pump assembly in direction
of red arrow.
1 Loosen the nut.
2 Remove washing heater by pulling out.
< Heater for Washing>
• Rating : 230V 2000W
• Resistant : 24.5~28.5Ω
CAUTION
When assembling the washing heater, insert
the heater to heater clip on the bottom of tub
and check the position of wire color.
56