Markings On Tool - DeWalt XR LI-ION DCV517 Original Instructions Manual

such marks by D WALT is under license. Other trademarks and
e
trade names are those of their respective owners.
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.

Markings on Tool

The following pictograms are shown on the tool:
b
Read instruction manual before use.
Date Code Position (Fig. B)
The date code 10 , which also includes the year of manufacture,
is printed into the housing.
Example:
Year and Week of Manufacture
Description (Fig. A, B, C)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
On/off switch
1
Hose nozzle
2
Vacuum nozzle
3
Hose connector
4
Tank inlet (Fig. C)
5
Rear latch
6
Tank
7
Battery pack (Fig. B)
8
Battery release button (Fig. B)
9
Intended Use
Your DCV517 cordless vacuum cleaner has been designed to
vacuum dry and wet substances in professional applications.
The vacuum cleaner is intended for vacuuming materials that
are not harmful to health.
This product is NOT to be used for filtering of pathogens, for
example COVID-19. Follow all local, state and federal guidance
on general cleaning practices.
This vacuum cleaner is a professional power tools.
DO nOT use to vacuum liquids.
nOTE: This appliance is suited for commercial use, e.g., in
hotels, schools, hospitals, factories, shops, offices, rental
companies, and on construction sites.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
2022 XX XX
• This machine is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge. Children
should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.

WARNING: Use only D
Inserting and Removing the Battery Pack
from the Tool (Fig. B)
nOTE: Make sure your battery pack
To Install the Battery Pack into the Tool Handle
1. Align the battery pack with the rails inside the tool's
handle (Fig. B).
2. Slide it into the handle until the battery pack is firmly seated
in the tool and ensure that you hear the lock snap into place.
To Remove the Battery Pack from the Tool
1. Press the battery release button
battery pack out of the tool handle.
2. Insert battery pack into the charger as described in the
charger section of this manual.
Fuel Gauge Battery Packs (Fig. B)
Some D WALT battery packs include a fuel gauge, which
e
consists of three green LED lights that indicate the level of
charge remaining in the battery pack.
To actuate the fuel gauge, press and hold the fuel gauge
button . A combination of the three green LED lights will
11
illuminate, designating the level of charge left. When the level
of charge in the battery is below the usable limit, the fuel gauge
will not illuminate and the battery will need to be recharged.
nOTE: The fuel gauge is only an indication of the charge left on
the battery pack. It does not indicate tool functionality and is
subject to variation based on product components, temperature
and end-user application.
Removing and Refitting the Hose (Fig. C)
Removing
1. Take the hose nozzle
2
2. Turn the connecting piece
3. Pull the hose off the vacuum inlet
connecting piece.
Refitting
1. Insert the hose connector
care to align the tabs on the connector with the notches in
the tank inlet hole.
2. Turn the connecting piece clockwise to fix the hose
it position.
3. Insert the hose nozzle 2
WALT battery packs and chargers.
e
is fully charged.
8
9 and firmly pull the
out of the fitting .
3
anti-clockwise.
4
at the
5
4 into the tank inlet 5 taking
into the vacuum nozzle 3
EngLIsh
.
27