Nylon Line Replacement - Echo SRM-225SB Operator's Manual

nylon lIne replacement

1. Hold drum securely. Push spool in, and turn clockwise until locking
peg clicks.
2. Pull spool out of drum. Clear any remaining line or debris from
spool and drum.
3. Align pegs on inner drive (A) with grooves in spool (B), and install
spool onto drum. Do not push down on spool. Turn spool counter
clockwise until locking peg clicks into hole in spool (C).
4. Align arrows on spool with marks on drum.
5. Insert two ends of one 24-foot piece of .095 nylon trimmer line into
holes on sides of drum.
G T
rass rimmer
O
peraTOr
a
C
/B C
rush uTTer
' m
s anual
B
27