Mercedes-Benz SLC 2018 Operator's Manual page 252

Flat tire
250
H
Environmental note
Have the used tire sealant bottle disposed of
professionally, e.g. at a qualified specialist
workshop.
If tire pressure of 200 kPa (2.0 bar/29 psi) has
been achieved after a maximum period of ten
minutes:
Switch off the tire inflation compressor.
X
Unscrew the filler hose from the valve of the
X
faulty tire.
Stow the tire sealant bottle and the tire infla-
X
tion compressor.
Pull away immediately.
X
Stop after driving for approximately ten
X
minutes and check the tire pressure with the
tire inflation compressor.
The tire pressure must now be at least
130 kPa (1.3 bar/19 psi).
G
WARNING
If the required tire pressure is not reached
after driving for a short period, the tire is too
badly damaged. The tire sealant cannot repair
the tire in this instance. Damaged tires and a
tire pressure that is too low can significantly
impair the vehicle's braking and driving char-
acteristics. There is a risk of accident.
Do not continue driving. Contact a qualified
specialist workshop.
i
In cases such as the one mentioned above,
contact an authorized Mercedes-Benz Cen-
ter. Or call 1-800-FOR-MERCedes (in the
USA) or 1-800-387-0100 (in Canada).
Correct the tire pressure if it is still at least
X
130 kPa (1.3 bar/19 psi). See the Tire and
Loading Information placard on the driver's
side B-pillar or the tire pressure table in the
fuel filler flap for values.
To increase the tire pressure: switch on the
X
tire inflation compressor.
To reduce the tire pressure: depress pres-
X
sure release button : next to pressure
gauge ;.
When the tire pressure is correct, unscrew the
X
filler hose from the valve of the sealed tire.
Screw the valve cap onto the tire valve of the
X
sealed tire.
To remove the tire sealant bottle from the tire
X
inflation compressor, press together the lock-
ing tabs on the yellow cap.
Pull the tire sealant bottle out of the tire infla-
X
tion compressor.
The filler hose remains attached to the tire
sealant bottle.
Drive to the nearest qualified specialist work-
X
shop and have the tire changed there.
Have the tire sealant bottle and the filler hose
X
replaced as soon as possible at a qualified
specialist workshop.
Have the tire sealant bottle replaced every
X
four years at a qualified specialist workshop.