Fisher & Paykel DishDrawer DS603-H User Manual page 35

Fault Codes
F1
F2
F3
F4
F9
U1
All manuals and user guides at all-guides.com
Possible Causes
Flood switch has been
activated.
Motor problem.
Temperature sensor failed.
Faulty temperature sensor
or element
Electronics malfunction.
Fill Fault
What to Do
Turn the water and power supply to the
®
DishDrawer off and call your Authorized
Service Center.
Call your Authorized Service Center.
Ensure water coming in through the inlet
hose is not hotter than 65
need to install a tempering valve on your
water supply.
Call your Authorized Service Center.
Call your Authorized Service Center.
1
Turn the DishDrawer® water supply on.
2 Ensure the spray arm can rotate about
the center, and if the DishDrawer® is
full of water, it will need to be emptied
manually.
3 Call your Authorized Service Center.
o
C. You may
29