Fisher & Paykel DishDrawer DS603-H User Manual page 32

Problem
Unclean dishes
DishDrawer®
interior is stained
26
All manuals and user guides at all-guides.com
Possible Cause
Wash program unsuitable
for the load.
Spray arm unable to rotate. Ensure no items are obstructing the
DishDrawer® overloaded/
incorrectly loaded.
Filter plate/drain filter is
incorrectly inserted.
Detergent put in the wrong
compartment.
Excessive food not
removed from dinnerware
prior to cleaning.
Unsuitable detergent.
Not enough detergent.
Spray arm holes are
blocked.
Filter plate/drain filter is
blocked.
Mega rack incorrectly
installed.
Insufficient salt in the water
softener.
Some foods, like tomato
based products, may
stain the inside of the
DishDrawer®.
What to do
Refer to the wash programs section for a
suitable wash program, or the soils were
too heavily baked on and dishes may
need soaking.
spray arm path.
Refer to the section on loading.
Refer to the user maintenance section.
Detergent must be placed in the large
compartment.
Scrape all food scaps off dinnerware
prior to loading.
Use recommended brands of dishwasher
detergent.
Refer to the detergent section or the
detergent manufacturer's instructions.
Clean the spray arm.
Clean the filter plate and drain filter.
Refer to the accessories section for
correct installation.
Ensure there is enough salt in the water
softener and you may need to increase
the water softener setting if the problem
persists.
Pre-rinse dishes before placing in the
DishDrawer®. Alternatively, using the
Rinse program after adding the dishes
may minimize staining.